OPTIONAL UPPER PELLET LOADING KIT
The optional pellet loading kit allows to load the pellets into the hopper without removing the insert from the installation
opening (which requires switching off the machine).
The kit can be used as an additional hopper of the insert (9kg ~ with 600mm tube configuration)
The kit can be assembled at a later time too.
FOLLOW THE ASSEMBLY INSTRUCTIONS CAREFULLY!
ALWAYS FOLLOW THE ASSEMBLY INSTRUCTIONS IN COMPLETE SAFETY!
THE INSERT MUST BE COMPLETELY COLD, SWITCHED OFF
AND DISCONNECTED FROM THE ELECTRICAL POWER SUPPLY.
14
14
CAUTION!
ENGLISH