Troubleshooting - Easy Home HTJ-2060B Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Troubleshooting

CAUTION: DO NOT attempt to repair the motor or nebulizer yourself. If the
humidifier continues to not operate please call customer service.
Problem
The power indicator light is staying
red and not turning green:
Humidifier is working than stops:
If humidifier does not work at all:
If there is a strange odor:
The power indicator light is green
but there is no mist being emitted:
White dust appears and settles
outside the humidifier:
Solution
Clean the base especially where
the water level sensor float is
Ensure it is properly plugged into a
power outlet.
Check that the control knob is in
the ON position.
If Power On indicator light does
not come on, bring to authorized
service station.
Clean the tank with water and
vinegar or bleach and rinse with
clean water.
Leave the tank open for some time
without the cap, in a cool place.
Check that there is water in the
tank.
Check for possible lime deposits
on the water level sensor or the
nebulizer.
Make sure that nothing blocks the
vapor output slots.
Check that the fan vent on bottom
of humidifier is not blocked.
Empty the humidifier and rinse the
water basin with cool tap water
and allow to dry for 15 to 30 min.
Area tap water may have too
many minerals, change to filtered
or distilled water.
Troubleshooting
13

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido