Samsung DW80R9950 Serie Manual De Instalación página 23

NOTE
• If the leveling legs are rotated to the
left (clockwise), they are loosened and
the front of the dishwasher is raised. If
they are rotated to the right (counter
clockwise), they are tightened and the
front of the dishwasher is lowered.
• You can adjust the leveling legs by a
max of / " However, leveling up to
16
32
the max height is not recommended.
NOTE
To adjust the height of a rear leg, turn the
T210 Torx (at the front of the base) to the
left to raise the back of the dishwasher
using the proper tool (T20 Torx).
CAUTION
• Before you move the dishwasher for installation, make sure to adjust the height of the
legs so the legs are as short as possible. This prevents the legs from breaking. Level the
dishwasher by adjusting the height of the legs after you have the dishwasher in place.
• If the product is installed unleveled or with the leg missing, the door may not close
completely, causing a leak of steam or water.
• When adjusting the height of the dishwasher, make sure the top gasket is inserted
seamlessly underneath the top of the kitchen cabinet. Otherwise, it may increase noise
when the dishwasher is operating.
DW9900R_DD68-00208A-00_EN.indd 23
English 23
12/29/2018 1:57:18 PM