Installation
STEP 9 Securing the dishwasher
You must fix the dishwasher to the countertop or cabinet side walls for additional stability
and safety.
To the countertop
If the countertop is made of wood or the material will not be damaged by drilling, follow
this.
24
English
DW9900R_DD68-00208A-00_EN.indd 24
1. Put a large towel into the bottom of
the dishwasher(covering the filter) to
prevent wood shavings or a dropped
screw from falling into the sump.
2. Insert the provided brackets into the
top front holes of the dishwasher as
shown.
If the brackets are too long, cut them
down using pliers.
3. Pre-drill the overlapping holes of the
brackets.
Make sure the hole is smaller than the
diameter of the screw.
4. Tighten the provided screws.
5. Assemble the provided plastic caps as
shown.
CAUTION
• After installing the dishwasher inside
the cabinet, check if the door opens and
closes freely with no interruption with
the cabinet.
• If the plastic caps are not assembled,
water may leak and cause a fire or
electric shock.
12/29/2018 1:57:19 PM