HQ-Power HQMH10005 Manual Del Usuario página 11

7. IR Remote Controller
7.1 Installing the Battery
Do not puncture batteries or throw them in fire as they may explode. Do not attempt to
recharge non-rechargeable batteries (alkaline). Dispose of batteries in accordance with
local regulations. Keep batteries away from children.
Remove the battery from the remote control if it will be stored for a long period.
1. Open the battery compartment and install the battery according to the correct
polarity.
2. Close the battery compartment.
7.2 Functions
BLACK OUT
Press this button to black out the current active mode. Press again to return.
AUTO
Enables you to run the automatic programmes.
1. Press <AUTO>.
2. Press <+> or <-> to choose the different programmes.
SOUND
Enables you to run the sound-controlled programmes.
1. Press <SOUND>.
2. Press <+> or <-> to choose the different programmes.
STROBE
Press this button to activate the stroboscope. Press again to de-activate.
1. Press <STROBE>.
2. Press <+> or <-> to adjust the strobe speed.
3. Press <STROBE> to switch off the strobe.
SPEED
Enables you to adjust the speed of the automatic/sound-controlled programmes.
1. Press <SPEED>.
2. Press <+> or <-> to choose the programme.
SENSITIVITY
Enables you to adjust the microphone sensitivity.
1. Press <SENSITIVITY>.
2. Press <+> or <-> to adjust the microphone sensitivity.
DMX/%
Allows you to activate/de-activate the DMX mode.
V. 02 – 26/12/2018
HQMH10005
11 ©Velleman nv