Before Using For The First Time; Instructions For Use - Brandt SLJ300 Manual De Instrucciones

b)

Before Using for the First Time

 Assembly
c)

Instructions for Use

 Before Using for the First Time
- Unpack the machine and remove all the paper and plastic. Makes sure no pieces of
packaging remain inside the machine.
- Wash and wipe the motor unit and the other parts of the machine with a slightly damp cloth.
- Place the two receptacles beneath the spouts.
 "Juice" Function
Step 4:
Align the bowl and the feed tube so that the
arrow on the bowl faces the locking pictogram.
The feed tube will not close correctly if the
endless screw and the bowl are not properly
assembled.
Step 3:
Insert the endless screw and make sure it clicks
in correctly.
Step 2:
Assemble the parts in the following order:
bowl>basket>filter. Make sure that the arrow
on the bowl is aligned with the arrow on the
sieve.
The basket must be correctly assembled
between the two other parts.
N.B. : Two filters are supplied, one with large
and one with small holes. If you don't want any
pulp select the one with small holes.
Step 1:
Place the bowl on the body of the machine.
22