Tabla de contenido
Publicidad
Input Voltage
Frequency
Display
Function
No.
①
②
③
④
⑤
STEP 1 – PASO 1- ETAPE 1 - FASE 1 - STEP 1 – STAP 1:
Carry out the machine from the package by two persons and place it lightly on flat floor, and put other fittings beside
the machine. Raise the front end of the electronic watch with your hands from the running board: 1. do not let the end
of the hand bump on ground, for it may damage the handle. 2. be careful when turn to the stand tube, then align the
holes and use two ① M8*20 screws and ④ flat washer to screw up the left and right stand tube with the electronic
watch.
STEP 2 – PASO 2- ETAPE 2 - FASE 2 - STEP 2 – STAP 2:
Lift up the stand tube and electronic watch according to the picture (make sure not to press the signal wire). One
person hold the electronic watch steady and the other person puts 2 ② M8*65 screws and ④ flat washer at two sides,
and screw up them with ③ M8 nut and use 2 ① M8*20 screws and ④ washer to screw up the front..
Time, Speed, distance, Calorie, heart rate, MP3, USB
Spare Parts
Qty
M8×20
6
M8×65
2
M8 Nut
2
Flat Washer
8
ST4X15
2
220V±10%
50/60 HZ
LCD
Accessories
Protecting cove of base vertical pipe (left, right)
No.
Spare Parts
5mm Wrench
(6)
6mm Wrench
(7)
(8)
Multi- Wrench
Silicone oil
(9)
User's Manual
(10)
FYTTER |WWW.FYTTER.COM
Qty
1
1
1
1
1
1
M8*20
2
M8*65
PAG- 16
Publicidad
Tabla de contenido
