Remote Control - MAC Audio MPS 501 Notas Importantes Sobre La Instalación

REMOTE CONTROL

1 ON/STBY: Switches the device on when it is in the standby mode. Conversely the device can
be switched from power operation to the standby mode.
2 CLOCK:
In standby mode, press and hold CLOCK to adjust the clock time.
• Use SKIP BACK or SKIP FORWARD to select the 24 or 12 hour clock mode.
• Press CLOCK to confirm your selection.
• Use SKIP BACK or SKIP FORWARD to adjust the hours.
• Press CLOCK to confirm your selection.
• Use SKIP BACK or SKIP FORWARD to adjust the minutes.
• Press CLOCK to confirm your selection.
Press SKIP BACK or SKIP FORWARD to select the time synchronization (SYNC ON or OFF).
Press CLOCK to confirm your selection. If the setting SYNC ON is selected, the time is
automatically updated during FM/RDS and DAB operation (Note: the automatic time update
for FM / RDS operation is only possible with a sufficiently strong reception signal).
20