General power tool safety
warnings
WARNING! Read all safety warnings and
!
all instructions. Failure to follow the
warnings and instructions may result in
electric shock, fire and/or serious injury.
IMPORTANT! Save all warnings and instructions for
future reference.
Please read the operator's manual carefully and make
sure you understand the instructions before using the
machine.
Check before starting
•
Always remove the battery to prevent the machine
being started by accident. Always disconnect the
battery before any maintenace on the machine.
•
Before using the machine and after any impact, check
for signs of wear or damage and repair as necessary.
•
Inspect the working area. Remove all loose objects,
such as stones, broken glass, nails, steel wire, string,
etc. that could be thrown out or become wrapped
around the cutter or cutter guard.
•
Check the motor for dirt and cracks. Clean off grass
and leaves from the engine using a brush. Gloves
should be worn when necessary.
•
Check that the trimmer head is completely attached to
the trimmer.
•
Check that the machine is in perfect working order.
Check that all nuts and screws are tight.
•
Check that the trimmer head and trimmer guard are
not damaged or cracked. Replace the trimmer head or
trimmer guard if they have been exposed to impact or
are cracked. Always use the recommended guard for
the cutting attachment you are using. See chapter on
Technical data.
•
The machine operator must ensure that no people or
animals come closer than 15 metres while working.
When several operators are working in the same area
the safety distance should be at least 15 metres.
•
Do an overall inspection of the machine before use,
see maintenance schedule.
•
National or local regulations may regulate the use.
Comply to given regulations.
Personal safety
•
The cutting tool does not stop immediately after the
machine is turned off.
•
The machine is only design for trimming.
•
Keep bystanders away.
•
Stay alert, watch what you are doing and use
common sense when operaing a power tool. Do
GENERAL SAFETY PRECAUTIONS
not use a power tool while you are tired or under
the influence of drugs, alcohol or medication. A
moment of inattention while operating power tools
may result in serious personal injury.
•
This appliance is not intended for use by person
(including children) with reduced physical, sensory or
mental capabilities, or lack of experience and
knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a
person responsible for their safety. Children should be
supervised to ensure that they do not play with the
appliance.
•
Never allow children or other persons not trained in
the use of the machine and/or the battery to use or
service it. Local laws may regulate the age of the user.
•
Store the equipment in a lockable area so that it is out
of reach of children and unauthorized persons.
•
Keep hands and feet away from the cutting area at all
times and especially when switching on the motor.
•
Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves
away from moving parts. Loose clothes, jewellery or
long hair can be caught in moving parts.
•
Wear personal protective equipment. See instructions
under the heading "Personal protective equipment".
•
Always use face or dust mask if operation is dusty.
•
Turn off the machine when it has to be moved. Always
remove the battery when passing the machine to
another person.
•
Transport guard must always be used for storage and
transport.
•
Keep in mind that it is you, the operator that is
responsible for not exposing people or their property
to accidents or hazards.
Power tool use and care
•
The only accessories you can operate with this
product are the cutting attachment we recommend in
the technical data chapter.
•
Never use a machine that has been modified in any
way from its original specification. Never use the
machine near explosive or flammable materials.
•
Never use a machine that is faulty. Carry out the safety
checks, maintenance and service instructions
described in this manual. Some maintenance and
service measures must be carried out by trained and
qualified specialists. See instructions under the
heading Maintenance.
•
Only use original spare parts.
•
Always ensure that ventilation openings are kept clear
of debris.
•
Keep handles dry, clean and free from oil and grease.
•
All covers, guards and handles must be fitted before
starting.
–
English
7