Construction Characteristics - Ferroli AQUA1 PLUS 160 HT Manual De Instalación Y Mantenimiento

Installation and maintenance manual
3

CONSTRUCTION CHARACTERISTICS

1 Heat pump
2 Control panel.
3 Enclosure in embossed ABS.
4 Electric heating element
5 Replaceable magnesium anode.
6 Air inlet ( 160 mm).
7 Air outlet (
8 Cold water inlet connection joint (G 1").
9 Hot water outlet connection joint (G 1").
10 Recirculation fitting (G ¾").
11 Condensate drain (G 1/2").
12 Steel tank (boiler) enamelled according to UNI standards (capacity: 160; 200; 260 litres).
13 Condenser.
14 Hermetically-sealed rotary compressor.
15 High-efficiency finned evaporator with Al-tube without welding
16 Ambient air recirculation fan.
17 Upper boiler probe.
18 Lower boiler probe.
19 50 mm polyurethane insulation.
160 mm).
pag. 4 / 23