This appliance is designed for household use only.
Description
1a Sliding beard comb (3 – 11 mm in 2 mm steps)
1b Sliding hair comb (13 – 21 mm in 2 mm steps)
1c Release button sliding combs
1d Fix comb 1 (1 mm)
1e Fix comb 2 (2 mm)
2a Trimmer head
2b Ear & nose trimmer head
2c Detailed trimmer head
2d Body groomer head
3
On/off button
4
Charging indicator
5
Power socket
6
Special cord set (design can differ)
For electric specifications, see printing on the special cord set.
Charging
Recommended ambient temperature for charging is 41 °F to 95 ° F / 5 °C to
35 °C. The battery may not charge properly or at all under extreme low or
high temperatures. Recommended ambient temperature for trimming is
60 °F to 95 °F / 15 °C to 35 °C. Do not expose the appliance to temperatures
higher than 122 °F / 50 °C for extended periods of time.
• Connect the appliance (switched off) via the special cord set (6) to an
electrical outlet.
• A full charge takes approx. 1 hour and provides up to 60 minutes of
cordless operation time.
• Once the appliance is completely charged, discharge it through normal
use. Then recharge again to full capacity.
Charging indicator (4)
• The charging indicator blinks green when the appliance is being charged
and during cordless usage.
• When the battery is fully charged, it shines permanently green provided
the appliance is connected to an electrical outlet.
• The charging indicator flashes red when the battery is running low. You
should be able to finish your current trimming or shaving sequence.
7