DeWalt DCF680 Manual De Instrucciones página 15

Ocultar thumbs Ver también para DCF680:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Accessories
WARNING: Since accessories, other than those offered by
D
WALT, have not been tested with this product, use of such
E
accessories with this tool could be hazardous. To reduce the risk of
injury, only D
WALT recommended accessories should be used with
E
this product.
Recommended accessories for use with your tool are available
at extra cost from your local dealer or authorized service center. If
you need assistance in locating any accessory, please contact
D
WALT Industrial Tool Co., 701 East Joppa Road, Baltimore, MD
E
21286, call 1-800-4-D
WALT (1-800-433-9258) or visit our website:
E
www.dewalt.com.
Repairs
The charger and battery pack are not serviceable.
To assure product SAFETY and RELIABILITY, repairs, maintenance
and adjustment (including brush inspection and replacement) should
be performed by a D
WALT factory service center, a D
E
authorized service center or other qualified service personnel. Always
use identical replacement parts.
When deburring becomes difficult a new cutter may be required.
INSTALLING REPLACEMENT CUTTER ACCESSORY DWA2601IR
(FIG. 8)
WARNING: To reduce the risk of serious personal injury,
turn tool off and remove the battery pack before making any
adjustments or removing/installing attachments or accessories.
An accidental start-up can cause injury.
1. Use a 5/64 hex key to loosen and remove set screw (M).
2. Retract cone and tip cutter up and remove.
3. With the slot (N) in the magnetic bit holder and the slot (O) in the
cone aligned, insert new cutter (L) sliding the tip under the round
wire ring  (P) first. Then seat cutter. When seated correctly the
cutter should be flush with cone when in forward position.
4. Replace set screw. Align the tip with the hole in the cutter. Tighten
firmly.
CAUTION: If the set screw is lost or damaged do not replace with
anything but an exact replacement part.
FIG. 8
N
O
WALT
E
Register Online
Thank you for your purchase. Register your product now for:
• WARRANTY SERVICE: Registering your product will help you
obtain more efficient warranty service in case there is a problem
with your product.
• CONFIRMATION OF OWNERSHIP: In case of an insurance
loss, such as fire, flood or theft, your registration of ownership will
serve as your proof of purchase.
13
M
L
P

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Dcf682

Tabla de contenido