Maintenance; Technical Data - Urrea LO814 Manual De Usuario

MAINTENANCE

FILTER CARTRIDGE
Empty the collector filter when it gets full, is
recommended the use of an air compressor to
make a greater cleaning. To keep in optimal
function of your sander replace filter regu-
larly.
SANDPAPER
Inspect the sandpaper. The use of worn-out
sandpaper will degrade efficiency and cause
possible damage to the pad, replace the sand-
paper as soon an excessive abrasion is noted.
MOUNTING SCREWS
Regularly inspect all mounting screws and en-
sure that they are properly tightened. Should
any of the screws be loose, retighten them
immediately. Failure to follow this instruction
could result in serious hazard.
10

TECHNICAL DATA

VOLTAGE-FREQUENCY
SANDPAPER SIZE
ORBITS PER MINUTE
POWER
WEIGHT
120 V ~ 60 Hz
1/4 Sheet (104 mm x 112)
13 000
220 W
1,2 kg