General Power Tool Safety Warnings - Makita DTWA070 Manual De Instrucciones

ENGLISH (Original instructions)
SPECIFICATIONS
Model:
Fastening capacities
Maximum fastening torque
Torque range
Square drive
No load speed (RPM)
Impacts per minute
Overall length
Rated voltage
Net weight
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
Charger
• Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING:
Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or fire.
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harm-
ful interference to radio communications. Operation of this equipment in a residential area is likely to cause harm-
ful interference in which case the user will be required to correct the interference at his own expense.
SAFETY WARNINGS

General power tool safety warnings

WARNING:
Read all safety warnings, instruc-
tions, illustrations and specifications provided
with this power tool. Failure to follow all instructions
listed below may result in electric shock, fire and/or
serious injury.
Standard bolt
High tensile bolt
DTWA070 DTWA100
M5 - M12 (3/16" - 1/2")
M5 - M10 (3/16" - 3/8")
65 N•m 95 N•m
(48 ft•lbs) (70 ft•lbs)
Approx. Approx.
5 - 40 N•m 6 - 65 N•m
(Approx. (Approx.
4 - 30 ft•lbs) 4 - 48 ft•lbs)
9.5 mm (3/8")
0 - 2,500 /min
0 - 3,700 /min
144 mm 151 mm
(5-5/8") (5-15/16")
1.1 - 1.4 kg 1.2 - 1.4 kg
(2.5 - 3.0 lbs) (2.7 - 3.2 lbs)
BL1415NA / BL1430B / BL1460A
DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF
Save all warnings and instruc-
tions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
1. Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2. Do not operate power tools in explosive atmo-
spheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
2 ENGLISH
DTWA140 DTWA190
M6 - M16
(1/4" - 5/8") (5/16" - 5/8")
M6 - M12
(1/4" - 1/2") (5/16" - 9/16")
140 N•m
(103 ft•lbs) (136 ft•lbs)
Approx.
18 - 80 N•m 25 - 125 N•m
(Approx.
14 - 59 ft•lbs) 18 - 92 ft•lbs)
12.7 mm (1/2")
0 - 2,700 /min 0 - 2,600 /min
0 - 3,300 /min 0 - 3,000 /min
158 mm (6-1/4")
D.C. 14.4 V
1.2 - 1.5 kg 1.3 - 1.6 kg
(2.7 - 3.3 lbs) (3.0 - 3.5 lbs)
M8 - M16
M8- M14
185 N•m
Approx.
(Approx.