Ec Declaration Of Conformity - Makita 5705R Manual De Instrucciones

NOTE:
• Some items in the list may be included in the tool pack-
age as standard accessories. They may differ from
country to country.
Noise
The typical A-weighted noise level determined according
to EN62841-2-5:
Model 5103R
Sound pressure level (L
Sound power level (L
Uncertainty (K): 3 dB (A)
Model 5143R
Sound pressure level (L
Sound power level (L
Uncertainty (K): 3 dB (A)
Model 5903R
Sound pressure level (L
Sound power level (L
Uncertainty (K): 3 dB (A)
Model 5705R
Sound pressure level (L
Sound power level (L
Uncertainty (K): 3 dB (A)
Wear ear protection
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN62841-2-5:
Model 5103R, 5143R
Work mode: cutting wood
Vibration emission (a
Uncertainty (K): 1.5 m/s
Work mode: cutting metal
Vibration emission (a
Uncertainty (K): 1.5 m/s
Model 5903R
Work mode: cutting wood
Vibration emission (a
Uncertainty (K): 1.5 m/s
Work mode: cutting metal
Vibration emission (a
Uncertainty (K): 1.5 m/s
Model 5705R
Work mode: cutting wood
Vibration emission (a
Uncertainty (K): 1.5 m/s
ENG905-1
): 97 dB (A)
pA
): 108 dB (A)
WA
): 94 dB (A)
pA
): 105 dB (A)
WA
): 95 dB (A)
pA
): 106 dB (A)
WA
): 94 dB (A)
pA
): 105 dB (A)
WA
ENG900-1
2
or less
): 2.5 m/s
h, W
2
2
or less
): 2.5 m/s
h, M
2
2
): 3.0 m/s
h, W
2
2
): 4.0 m/s
h, M
2
2
): 2.5 m/s
h, W
2
• The declared vibration emission value has been mea-
sured in accordance with the standard test method and
may be used for comparing one tool with another.
• The declared vibration emission value may also be
used in a preliminary assessment of exposure.
WARNING:
• The vibration emission during actual use of the power
tool can differ from the declared emission value
depending on the ways in which the tool is used.
• Be sure to identify safety measures to protect the oper-
ator that are based on an estimation of exposure in the
actual conditions of use (taking account of all parts of
the operating cycle such as the times when the tool is
switched off and when it is running idle in addition to
the trigger time).

EC DECLARATION OF CONFORMITY

For European countries only
The EC declaration of conformity is included as Annex A
to this instruction manual.
ENG901-1
9