Ferroli PENELOPE HR Manual De Instalación, Uso Y Mantenimiento página 48

Level 1
04 – Select language
05 – Standby mode
06 – Buzzer
07 – Initial loading
08 – Stove status
4.6.1 Menu 01 – adjust fans
The speed of the air fans is authomatic and follows the maximum power programmed. If you want to decrease the
hot air flow it is possibile to set the maximum speed manually using the specific parameter in menu 01 and choosing
the value parameter from 1 up to 5: for example setting value parameter 3, the air fans will increase the air flow
speed authomatically without exceeding the value parameter 3 you programmed before.
As for ducted version the electrical connection is shown through led [ B ].
4.6.1 Menu 02 – set clock
The electronic control device has a lithium battery mod. CR2032 of 3 Volt inside. It allows the internal clock with
own autonomy; if the clock signal does not appear when the stove is off or when switching the stove again a series
of "0000" appears, it means it has to be substituted and you need to call one of our service point authorised for its
substitution.
4.6.3 Menu 03 – enable chrono
It allows to enable and disable all the thermostat functions
programmed; with the set ON you activate this function and it
appears the led [ D ] related to it.
When the daily, weekly, or week-end program is set you can see
on the upper right side of the display it appears the led [C].
04 – week-end program
Level 2
01 - Italian
02 - French
03 - English
04 - German
24 – Wednesday prog 3
25 – Thursday prog 3
26 – Friday prog 3
27 – Saturday prog 3
28 – Sunday prog 3
29 – start prog 4
30 – stop prog 4
31 – Monday prog 4
32 – Tuesday prog 4
33 – Wednesday prog 4
34 – Thursday prog 4
35 – Friday prog 4
36 – Saturday prog 4
37 – Sunday prog 4
01 – week-end chrono
02 – start 1
03 – stop 1
04 – start 2
05 – stop 2
Level 3
48
on / off
on / off
on / off
on / off
on / off
time
time
on / off
on / off
on / off
on / off
on / off
on / off
on / off
on / off
Level 4 Value
set
set
set
set
on / off
on / off
set
-
D C
PENELOPE HR
B