Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALL THE HOOD MOUNTING BRACKET
WALL STUDS
FRAMING BEHIND
MOUNTING BRACKET LOCATION
(ABOVE 36" HIGH COOKTOP)
7
41
/
" = bottom of hood 30" above cooktop
8
1. Construct wood wall framing that is flush with
interior surface of wall studs.
Make sure:
a) the framing is centered over installation
location.
b) the height of the framing will allow the
mounting bracket to be secured to the framing
within the dimensions shown.
2. After wall surface is finished, carefully center and
level the hood mounting bracket and secure it
to wall framing with (3) no. 8 x 1½" mounting
screws. Tighten the screws completely.
NOTE: Do not use drywall anchors.
CEILING
DUCT
HEIGHT
METHOD
37-7/8" 38-7/8" 39-7/8" 40-7/8" 41-7/8" 42-7/8" 43-7/8" 44-7/8" 45-7/8"
DUCTED
8 FEET
NON-DUCTED 37-7/8" 38-7/8" 39-7/8" 40-7/8" 41-7/8" 42-7/8" 43-7/8" 44-7/8" 45-7/8"
DUCTED
9 FEET
NON-DUCTED
DUCTED
10 FEET
NON-DUCTED
NOTE:
Minimum hood distance above cooktop must not be less than 26" .
Distances over 36" above the cooktop are at the installer's and user's discretion - providing that ceiling height and flue length permit.
DRYWALL
C L
1
9
9¹⁄
"
1 6
4
⁄
"
17
3 2
26"
27"
28"
MOUNTING BRACKET LOCATION ABOVE 36" HIGH COOK TOP
40-7/8" 41-7/8" 42-7/8" 43-7/8" 44-7/8" 45-7/8" 46-7/8" 47-7/8"
---
---
---
40-7/8" 41-7/8" 42-7/8" 43-7/8" 44-7/8" 45-7/8" 46-7/8" 47-7/8"
---
---
---
40-7/8" 41-7/8" 42-7/8" 43-7/8" 44-7/8" 45-7/8" 46-7/8" 47-7/8"
---
---
---
40-7/8" 41-7/8" 42-7/8" 43-7/8" 44-7/8" 45-7/8" 46-7/8" 47-7/8"
---
---
---
⁄
"
1 6
HOOD DISTANCE ABOVE 36" COOK TOP
29"
30"
31"
MODELS BWS1304SS • BWS1304BLS •
BWS2304SS • BWS2304BLS
NOTE:
On 8-ft. ceilings
Hood distance above cooktop is:
Minimum 26", Maximum 36" (for both ducted and
non-ducted discharge
On 9-ft. ceilings
Hood distance above cooktop is:
Minimum 29", Maximum 36" (for both ducted and
non-ducted discharge)
On 10-ft. ceilings
Hood distance above cooktop is:
Minimum 29", Maximum 36" (for both ducted and
non-ducted discharge).
NOTE: 10-ft. ceilings require 10-ft. Flue
Extension, model AEBWS (stainless steel) or
model AEBWSBLS (black stainless steel) for
ducted or non-ducted installations
(purchase separately).
32"
33"
34"
Page 5
35"
36"
---
---
---
---
Publicidad
Tabla de contenido
