Speaker Placement - M-Audio BX6 CARBON Guia Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Connecting to Preamp or Computer Outputs
Before connecting, make sure the output device's power has been turned off. Plug the XLR
balanced, TRS balanced or TS unbalanced cable to the corresponding output connectors of a
pre‑amplifier, computer or game console.

Speaker Placement

Placing speakers is one of the most important
procedures in order to monitor sound accurately.
To monitor with the BX6 Carbons performing to
their maximum capability, an appropriate listening
environment and correct placement are required.
Please refer to the following for correct BX6
Carbon placement.
1.
The monitors and the listener should basically
align to form a regular triangle. Refer to the
following diagram.
2.
Position the monitors so that the top of the
woofers are level with your ears in a normal
listening environment. Refer to the following
diagram.
3.
Place the monitors vertically with the woofer
on the bottom. Placing the BX6 Carbon
horizontally is not recommended.
Remarks: DO NOT place any obstacles that may
block the flow of air in front or between the
monitors. Also remove reflective materials such as
glass, mirrors or metal from the monitoring
environment. PLACE THOSE MATERIALS AWAY
FROM THE PATH OF THE SOUND FROM THE
BX6 Carbons.
Declaration for Always-On Products for Regulation (EC) No. 1275/2008:
To provide audio signal at the noise floor level, this studio monitor speaker product should be in the "always on" status for
terminal users to use. The requirement of a power management function as provided under point 2(d) of Annex II would be
"inappropriate for the intended use'' of the equipment. This product is an exception to the design requirements as provided
under Annex II, thus an "off," "standby" and/or "another condition" mode and a power management function is not
appropriate for its intended use. When not using this product, we suggest switching it off.
6

Publicidad

Tabla de contenido
loading

Tabla de contenido