Attaching the Lens
For information on how to attach the lens, refer to the
operating instructions for your digital camera.
Attach the lens after turning off the digital camera.
0
Attach the lens after removing
0
the lens rear cap.
After removing the lens from
0
the digital camera, be sure to
attach the lens cap and lens
rear cap to prevent dust and
other particles from
accumulating on or entering
the lens.
∫ Attaching the lens hood
Hold the lens hood with your fingers
placed as shown in the picture.
Do not hold the lens hood in a way
0
that twists or bends it.
1
Align mark A (
the lens hood with the
mark on the tip of the
lens.
2
Rotate the lens hood in
the direction of the
arrow to align mark B
(
) on the lens hood
with the mark on the tip
of the lens.
Attach the lens hood by
0
rotating it until it clicks.
∫ Removing the lens hood
While pressing the lens
hood button C, rotate the
lens hood in the direction
of the arrow and then
remove it.
) on
DVQX1971
(ENG)
21