Pulsar HELION Manual De Instrucciones página 10

The default password (12345 or 12345678
=
depends on product firmware) will appear on the
screen.
Set the desired password with the UP (10) and
=
DOWN (8) buttons (button UP to increase value;
button DOWN to reduce). Switch between digits
with a short press of the M button.
Save the password and exit the submenu with a
=
long press of the M button.
Access
Access level setup
level setup
This menu option allows you to set required access
level of the Stream Vision application to your
Owner
device.
Guest
Access level Owner. The Stream Vision user has
=
the complete access to all device's functions.
Access level Guest. The Stream Vision user has
=
the access only to the real time video stream from
the device.
The following settings are available:
Settings
Language selection
Language
Enter the submenu "Language" with a short
=
English
press of the M button.
Select one of the available interface languages
=
with a short press of the UP/ DOWN buttons:
English, French, German, Spanish.
Switch between languages with a short press of
=
the M button.
Save selection and exit the submenu with a long
=
press of the M button.
Date setup
Enter the submenu "Date" with a short press of
=
Date
the M button. Date format is displayed as:
YYYY/MM/DD (year/month/day)
Select the correct values for the year, month and
=
date with a short press of the UP/ DOWN buttons.
Switch between digits with a short press of the M
=
button.
Save selected date and exit the submenu with a
=
long press of the M button.
13
Time setup
Enter the submenu "Time" with a short press of
=
Time
the M (9) button.
Select the desired time format with a short press
=
of the UP/ DOWN buttons: 24 or PM/AM.
Switch to hour setup with a short press of the M
=
button.
Select hour value with a short press of the UP/
=
DOWN buttons.
Switch to minute setup with a short press of the M
=
button.
Select minute value with a short press of the UP/
=
DOWN buttons.
Save selected date and exit the submenu with a
=
long press of the M button.
Units of
Selection of units of measurement
measure
Enter the submenu "M/Y" with a short press of
=
the M button.
M
Select the desired time format with a short press
=
Y
of the UP/ DOWN buttons, press M again.
Meters
Menu exit will take place automatically.
=
Formatting.
This menu option allows you to format your device's
Flash card or memory card (erase all files from its
Format
memory).
Enter the Format submenu with a short press of
=
the M (9) button.
With a short press of the UP/ DOWN buttons
=
select "Yes" to format the memory card or "No"
to return to the submenu.
Confirm selection with a short press of the M
=
button.
If "Yes" is selected, display will show "Do you
=
want to format memory card?" and "Yes" and
"No" options. Select "Yes" to format the memory
card.
Message «Memory card formatting» means
=
that formatting is in progress.
Upon completion of formatting the message
=
«Formatting completed» is shown.
If "No" is selected, formatting is aborted and you
=
return to the submenu.
14