LG UX830 Manual Del Usuario página 75

Requirements:
UX830 Phone
●
UX830 USB Cable
●
microSD TM card installed on
●
the phone
®
Windows XP Computer
●
Steps to using USB Mass Storage
mode:
1. Install the USB Cable drivers
into the computer.
2. After installing the USB cable
drivers, connect the cable to
the computer and attach the
phone. Allow the computer to
detect the phone USB drivers
and install them.
3. Make sure the microSD
has been formatted on the
phone so the required folders
will be created for use with
your phone. To format the
memory card navigate the
phone to Menu > Settings >
Phone Information >
6. Memory > 3. Card Memory
and select the Format option.
Select YES to format the
microSD
Note
If an error message saying, "Not
available during the UMS mode",
follow these steps:
Touch
Try the card again.
4. On the phone, go to Menu >
Settings > USB Connection >
USB Mass Storage.
A prompt will be displayed
stating "USB Connection Set".
Press END key to return to
TM card
standby mode. After a few
seconds, a new explorer
window containing the
following folders should pop
up on the computer screen:
™ card.
> > > USB Modem
73