Parts For Installation; Lower Anchor Installation - Diono solana 2 Manual De Instrucciones

PARTS FOR INSTALLATION

3
12
1-855-463-4666
1. Lower Belt Guide
2. LATCH Adjuster Straps
3. LATCH Connectors
4. Cup Holder
2
1
4

LOWER ANCHOR INSTALLATION

WARNING! Unsecured objects can become flying hazards and can cause
serious injury in an accident. If your vehicle is equipped with lower
anchors, Diono always recommends installation utilizing the LATCH
connectors with this booster seat.
To improve safety and performance, this booster seat is
equipped with a lower anchorage system that allows
secure attachment to a vehicle's lower anchor locations.
1. Disengage LATCH connectors from storage slots and
lay booster seat on its side. While depressing the cam
lock lever, pull LATCH connectors away from the booster
seat and extend both straps all the way.
2. Attach both LATCH connectors to the vehicle
anchors, starting with the connector that is furthest
from you. For ease of use, make sure open end of
hooks face upward during use.
3. While pushing booster against vehicle seat, pull
one adjuster strap tight and then the other. Make
sure that both LATCH connectors are securely
attached to the vehicles lower anchors.
NOTE: Even with LATCH connectors properly attached
and adjusted, child seat will still have movement against
the vehicle seat back and bottom.
www.diono.com
1
2
3
13