SAFETY GUIDELINES
SAFETY SYMBOLS
The purpose of safety symbols is to attract your attention to possible dangers. The
safety symbols and the explanations with them deserve your careful attention and
understanding. The symbol warnings do not, by themselves, eliminate any danger. The
instructions and warnings they give are no substitutes for proper accident prevention
measures.
WARNING:
Operator's Manual, including all safety alert symbols such as "DANGER," "WARNING,"
and "CAUTION" before using this tool. Failure to following all instructions listed below
may result in electric shock, fire, and/or serious personal injury.
DAMAGE PREVENTION AND INFORMATION MESSAGES
These inform the user of important information and/or instructions that could lead
to equipment or other property damage if they are not followed. Each message is
preceded by the word "NOTICE", as in the example below:
NOTICE:
Equipment and/or property damage may result if these instructions are not
followed.
WARNING:
thrown into your eyes, which can result in severe eye damage. Before beginning power
4
56V LITHIUM-ION CORDLESS BLOWER — LB4800/LB4800-FC
Be sure to read and understand all safety instructions in this
The operation of any power tools can result in foreign objects being
tool operation, always wear safety goggles or safety glasses with side
shields and a full face shield when needed. We recommend a Wide
Vision Safety Mask for use over eyeglasses or standard safety glasses
with side shields. Always use eye protection which is marked to
comply with ANSI Z87.1.