Headboard Bracket Installation Guide Optional - Ashley M9X432 Manual Del Usuario

Headboard Bracket Installation
Guide (Optional)
Headboard brackets are an optional accessory and are not included.
A 1/2'' (13 mm) socket and 1/2'' (13 mm) wrench are necessary to complete installation.
(2) Headboard Brackets (2) T-Brackets
STEP 1
a) Align the hole in the bracket to the sleeve into which the leg
threads. Hold the bracket in place and screw the leg into the
foundation until it is snug. DO NOT OVERTIGHTEN. Too much
force may cause the leg to spin freely.
b) The headboard bracket will have 2 tabs to accomodate any frame
type. Align the appropriate tab on the bracket with the hole on the
foundation. Use a M8*16 bolts and a nut to secure the bracket.
Make sure the bolt is tight. Ensure to use the washers at the illustrated
location.
STEP 3
You may now connect your headboard to the attachment plates using the remaining short bolts and nuts to secure it to the brackets. The heads
of the bolts will face outward. Use a 1/2'' (13 mm) socket and 1/2'' (13 mm) wrench to tighten the bolts.
HEADBOARD BRACKET COMPONENTS
(4) 3/8-20.5
washers with
bolts
Customer Service Toll Free: 1-800-248-5988
—10—
(4) M8*16 (4) Nuts
STEP 2
a) To put the T-Bracket and Headbroad Bracket together, you will
need (2) M8×16 bolts and (2) nuts. Slip the bolts through the holes
from T-Bracket to Headbroad Bracket with the head of bolt facing
outward. Use the 1/2'' (13 mm) socket and 1/2'' (13 mm) wrench to
tighten the bolts.
(2) Washers