Esoteric C-02X Manual Del Usuario página 9

A
Analog input connectors (LINE IN)
Connect the analog output connectors of Super Audio CD play-
ers, DVD players, cassette decks, tuners and other equipment to
these connectors.
Connect the R connector of a pair on this unit to the right (R)
connector of an output device and the L connector of the same
pair on this unit to the left (L) connector of the output device.
Use commercially-available cables for connections.
For XLR connectors: Use a balanced XLR audio cable.
Insert a balanced XLR plug until the con-
nector lever locks. Press this lever when
disconnecting.
For RCA connectors: Use an RCA audio cable.
Connect the white pin plugs to the white
(L) connectors and connect the red pin
plugs to the red (R) connectors.
o The XLR input connectors can be switched to 3 HOT (+)
(page 16).
o This unit does not have a built-in phono equalizer, so record
players cannot be connected to it directly.
To use a record player with this unit, connect it through a
phono equalizer, for example.
B
Grounding connector (SIGNAL GND)
Using a commercially-available sheathed wire to connect this
to the grounding terminal of a Super Audio CD player, power
amplifier or other device might improve the audio quality.
o This is NOT an electrical safety ground.
C
Analog output connectors (LINE OUT)
Output two channels of analog audio signals.
Connect these to the analog input connectors of a power ampli-
fier, for example.
Connect the R connector of a pair on this unit to the right (R)
connector of an input device and the L connector of the same
pair on this unit to the left (L) connector of the input device.
Use commercially-available cables for connections.
For XLR connectors: Use a balanced XLR audio cable.
Insert a balanced XLR plug into the con-
nector until it locks.
For RCA connectors: Use an RCA audio cable.
Connect the white pin plugs to the white
(L) connectors and connect the red pin
plugs to the red (R) connectors.
D
AC power inlet
Connect the included power cord to this inlet. After completing
all other connections, plug the power plug into a power outlet.
o Unplug the power cord from the outlet when you are not
planning to use the unit for an extended period of time.
Use only a genuine Esoteric power cord. Use of
V
other power cords could result in fire or electric
shock.
At Esoteric, we use Esoteric MEXCEL stressfree cables for
reference.
For detailed information, access the following website.
http://www.esoteric.jp/products/esoteric/accessory/indexe.html
9