Danby DCR047A1BBSL Manual Del Propietário página 6

OPERATING INSTRUCTIONS
DOOR REVERSAL INSTRUCTIONS
If the appliance is placed on its back or side for any
length of time during this process, it must be allowed
to remain upright for 6 hours before plugging it in
to avoid damage to the internal components.
1. Remove the hinge cover and upper hinge from
the top right side of the cabinet. Remove the
screw hole covers from the top left side of the
cabinet.
2. Remove the freezer door from the cabinet. Move
the hinge plug from the top left to the top right
side of the door.
3. Remove the center hinge from the right side
cabinet. Remove the screw hole covers from the
left side of the cabinet.
4. Remove the refrigerator door from the cabinet.
Move the hinge plug from the top left to the top
right side of the door.
5. Remove the leveling leg from the bottom left side
of the cabinet. Get the left lower hinge from the
accessory bag and install it on the left side of the
cabinet. Reinstall the leveling leg on the bottom
left side of the cabinet. Remove the leveling leg
and the lower hinge from the bottom right side
of the cabinet. Reinstall the leveling leg on the
bottom right side of the cabinet.
6. Install the refrigerator door. Install the center
hinge on the left side of the cabinet. Install
the screw hole covers on the right side of the
cabinet.
7. Install the freezer door. Install the upper hinge
on the top left side of the cabinet. Install the
screw hole covers on the top right side of the
cabinet.
Note: Ensure the rubber gaskets are making a good
seal with the cabinet all the way around the doors
before tightening the hinge screws.
1
2
3
4
5
5
6
7