5
1
2
3
6
4
Unpack your fan and check the contents. You should have the following items:
1. Mounting Plate (inside Canopy)
2. Downrod and Ball Assembly
3. Canopy
4. Decorative Motor Collar Cover
5. Fan Motor Assembly
IMPORTANT: THIS PRODUCT AND/OR COMPONENTS ARE COVERED
BY ONE OR MORE OF THE FOLLOWING U.S. PATENTS: 5,947,436;
5,988,580; 5,971,573; 6,010,306; 6,039,541; 6,046,416 AND OTHER
PATENTS PENDING.
2. Unpacking Your Fan
7
8
9
6. Blades Brackets (3)
7. Blades (3)
8. Lower Housing
9. Glass
10. Transmitter (Hand Unit)
a
c
10
a.
Blade attachment hardware
(9 screws)
Mounting & Electrical Hardware
b.
(1 hanger pin, 1 locking pin, 3 plastic
wire connectors, 1 rubber gasket)
Blade Balancing Kit
c.
d.
Blade Bracket Hardware
(6 screws and lockwashers)
REMOVE RUBBER PACKING MOUNTS IN THE
FAN MOTOR ASSEMBLY AND DISCARD BEFORE
INSTALLATION.
b
d