Take A Projector Out Of The Program; Preset Scenes; Programming A Preset Scene; Recalling A Preset Scene - Futurelight CP-256/32 Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

All Mirror-function:
Via the All Mirror-function, you can control the Pan/Tilt-movement of all projectors during the program run.
Press the Left/Right-button at the same time. The Left/Right-buttons start flashing and the display shows "All
Mirror". When you move the Encoders now, all projectors included in the program move at the same time. In
order to leave the All Mirror-mode press the Left/Right-button.

6.2.2 Take a projector out of the program

By intervening into a program, all values of a program can be adjusted for the selected projectors (e.g.
mirror-position, colour, gobo, etc.). Please note that only this function will be taken out of the program which
is manually adjusted. If you adjust the colour manually, the mirror continues moving like in the program. If
you adjust the mirror-position, the gobos change like in the program.
Press the Manual-button and select the desired projector via the respective projector select button. You can
choose all projectors at once if you hold the Manual-button for approx. 2 seconds. You can also choose
several projectors which will work synchronically then.
The program continues until you adjust anything manually.
If you adjust the mirror-position now, the mirror-movement will be taken out of the program and the mirror
stops at the position you entered.
If you wish to adjust another function, you have to adjust the DMX-value of the respective channel. Adjust the
DMX-value via the channel faders.
If you have taken a projector out of the program, you can insert the projector back in the program by pressing
the Recall-button.

6.3 Preset Scenes

A Preset Scene is a pre-adjusted stage memory which can be recalled at any time. With the CP-256/32, you
can program up to 16 different Preset Scenes which can be assigned to the projector select buttons 1-16.

6.3.1 Programming a Preset Scene

Press the Manual-button and select the desired projector via the respective projector select button. You can
choose all projectors at once if you hold the Manual-button for approx. 2 seconds.
Press the Scene-button and the display shows "Preset Scene". Select the desired Preset Scene via the
respective projector select button. If a Preset Scene has already been assigned to this button, the respective
projector name is shown in the display. Select a free button where no projector name appears.
Press the Edit-button and the display shows "Preset Mask Empty". Press the Mask-button and select the
desired projector via the respective projector select button. Press the Edit-button in order to return to the edit-
mode. Adjust the desired settings and save them via the Enter-button. The display shows "Saving" and the
Preset Scene is now saved on the respective button. Press the Recall-button in order to return to the main
menu.

6.3.2 Recalling a Preset Scene

Press the Manual-button and select the desired projector via the respective projector select button. You can
choose all projectors at once if you hold the Manual-button for approx. 2 seconds.
Press the Scene-button and the display shows "Preset Scene". Select the desired Preset Scene via the
respective projector select button. The projector moves to the defined position and projects the respective
settings.

6.3.3 Editing a Preset Scene

Press the Manual-button and select the desired projector via the respective projector select button. You can
choose all projectors at once if you hold the Manual-button for approx. 2 seconds.
Press the Scene-button and the display shows "Preset Scene". Select the desired Preset Scene via the
respective projector select button. The projector moves to the defined position and projects the respective
settings. Press the Edit-button in order to adjust the desired settings and save them via the Enter-button.
31

Publicidad

Tabla de contenido
loading

Tabla de contenido