Link A Preset Scene With A Chaser; Edit A Chaser; Basic Settings; Rename Unit - Futurelight CP-256/32 Manual Del Usuario

Press the Enter-button. Select the menu "Chaser Link" via the Up/Down-buttons or the Data Entry fader and
press the Enter-button. Select the desired program via the projector select buttons.
Select the desired chaser for scene 1 via the Left/Right-button. Select the next scenes via the respective
Projector Select-button and enter the desired chaser. Press the Enter-button twice in order to save the
program.

6.9.3 Link a Preset Scene with a chaser

Press the Menu-button and select "Menu 3 Make Chaser" via the Up/Down-buttons or the Data Entry fader.
Press the Enter-button. Select the menu "Chaser Preset Link" via the Up/Down-buttons or the Data Entry
fader and press the Enter-button.
Select the desired chaser for Preset Scene 1 via the Left/Right-button. Select the next Preset Scenes via the
respective Projector Select-button and enter the desired chaser. Press the Enter-button twice in order to
save the Preset Scenes.
The occupation of the Projector Select-buttons in the menu "Link Chaser Preset" corresponds to the
occupation that can be recalled via the Sequence-button. If you wish to link another of the 99 available
chaser to a Projector Select-button, please proceed as described above.

6.9.4 Edit a chaser

Press the Menu-button and select "Menu 3 Make Chaser" via the Up/Down-buttons or the Data Entry fader.
Press the Enter-button. Select the menu "Chaser Edit" via the Up/Down-buttons or the Data Entry fader and
press the Enter-button. Select the desired chaser via the Up/Down-buttons or the Data Entry fader.
Press the Enter-button in order to edit step 1. Enter the desired picture via the Projector Select-buttons (e.g.
button 1, 2, 3 and 4 on) and press the Enter-button. Enter the Chaser-speed via the Up/Down-buttons or the
Data Entry fader and press the Enter-button.
Press the Right-button and edit step 2. Edit all desired steps and save the changes via the Escape and
Enter-button.

6.10 Basic settings

With the CP-256/32, you can adjust different basic settings like projector names, effect names, greeting text
etc. to the user's requirements.
Press the Menu-button and select "Menu 5 Setup" via the Up/Down-buttons or the Data Entry fader. Press
the Enter-button and the display shows "Code____". Enter the Code 2222 and press the Enter-button.

6.10.1 Rename unit

Select " Setup 1. Rename unit" via the Up/Down-buttons or the Data Entry fader and press the Enter-button.
Select the desired projector via the Up/Down-buttons or the Data Entry fader and press the Enter-button. The
cursor of the second field starts flashing and you can change the letters via the Up/Down-buttons or the Data
Entry fader. You can jump from one field to another using the Left/Right-buttons. As soon as you have
finished your inputs, press the Enter-button twice in order to save the settings.

6.10.2 Rename effect

Select " Setup 2. Rename effect" via the Up/Down-buttons or the Data Entry fader and press the Enter-
button. Select the desired effect via the Up/Down-buttons or the Data Entry fader and press the Enter-button.
The cursor of the second field starts flashing and you can change the letters via the Up/Down-buttons or the
Data Entry fader. You can jump from one field to another using the Left/Right-buttons. As soon as you have
finished your inputs, press the Enter-button twice in order to save the settings.

6.10.3 Rename type

Select " Setup 3. Rename type" via the Up/Down-buttons or the Data Entry fader and press the Enter-button.
Select the desired projector via the Up/Down-buttons or the Data Entry fader and press the Enter-button. The
cursor of the second field starts flashing and you can change the letters via the Up/Down-buttons or the Data
Entry fader. You can jump from one field to another using the Left/Right-buttons. As soon as you have
35