Troubleshooting - Smartpond 71142 Manual De Instrucciones

Step 1: Before cleaning,
always disconnect the
pump from the power
source and remove the
inlet screen.
Step 2: Remove the
impeller housing to expose
the impeller assembly.
Remove the impeller
assembly by gently pulling
on the impeller blades.
NOTE: The impeller is held
in place by a magnet.
Step 3: Use a soft cloth
or brush and warm water
to clean the impeller, the
inside of the impeller
housing and the rotor
housing.
Step 4: Reassemble all pump parts and place in water before
reconnecting to the power source.

TROUBLESHOOTING

IF THE PUMP FAILS TO OPERATE:
• Check to make sure the power cord is plugged in; the pump is
getting power.
• Check the pump outlet and any tubing, nozzles, spitters etc. for
kinks or obstructions.
• Remove the inlet screen and/or pump cover, and impeller
housing to expose the impeller. Turn the impeller to ensure that
it is not broken or jammed.
IF THE PERFORMANCE OF THE PUMP IS NOT SATISFACTORY
OR THE PUMP DOES NOT FLOW EVENLY:
• Check to make sure the pump is completely submerged in
water.
PLEASE CALL CUSTOMER CARE BEFORE RETURNING ITEM TO LOWE'S: 1-888-755-4497
5