Troubleshooting Guide - Orbegozo PB 3000 Manual De Instrucciones

PB 3000

TROUBLESHOOTING GUIDE

1. Bluetooth not connected
l The scale and smart phone must be both have Bluetooth on.
l Check the IOS version of your smart phone; it must be IOS 8.0 or higher / Andorid 5.0 or
higher.
l Click Me -- > device find the scale
2. No body fat data measured when weighing
l User must be barefoot to measure the body fat.
l Make sure your feet and the scale are both dry.
l Scale not finishing weighing when the number display is flashing (Keep standing on the scale
around 10 second until the number on the display stops flashing).
l Bluetooth is not turned on.
l Bluetooth is paired with a difference scale.
3. The scale is producing inconsistent weights.
l Check whether the scale is on a hard, flat surface.
l Check each sensor foot on the back to make sure nothing is stuck to the bottom of it.
l Remove the batteries to restart the scale.
4. The App is display the incorrect flat-muscle ratio
The body parameter setting is incorrect, check to make sure that you enter the correct gender,
height, and age.
5. How do I recalibrate the scale after moving it or change the batteries?
Step on the scale to turn it on. Let is automatically drop to 0.0kg/lb to calibrate.
6. The scale does not turn on.
Remove the batteries and put it back. Make sure to insert the batteries in the correct direction.
7. How to change unit?
You need to change the scale unit by the backside button. Then APP will show the same unit
with the scale.
20