Connecting A Tv And Playback Components; Connecting Using Hdmi; Connecting Antennas - Pioneer VSX-430-K Manual De Instrucciones

Connecting a TV and playback components

Connecting using HDMI

HDMI/DVI-compatible components
DVD player, HDD/
DVD recorder
HDMI OUT
OSD can only be output
from HDMI Out.
4
Set-top box
Blu-ray Disc player,
Blu-ray Disc recorder
HDMI OUT HDMI OUT
HDMI IN
HDMI/DVI-compatible TV
Game console
HDMI OUT
If the TV does not support
the HDMI Audio Return
Channel function, this
connection is required
to listen to the TV sound
over the receiver.
R L
OPTICAL
ANALOG AUDIO OUT DIGITAL AUDIO OUT
Select one
• If the TV supports the HDMI Audio Return Channel
function, the sound of the TV is input to the receiver via the
HDMI terminal, so there is no need to connect an optical
digital cable ( ). In this case, set ARC at HDMI Setup to
A
ON  "The HDMI Setup menu" on page 32.
• Please refer to the TV's operation manual for directions on
connections and setup for the TV.

Connecting antennas

FM wire antenna
4
1
CAUTION
• Handle the power cord by the plug part. Do not pull out
the plug by tugging the cord, and never touch the power
cord when your hands are wet, as this could cause a short
circuit or electric shock. Do not place the unit, a piece of
furniture, or other object on the power cord or pinch the
cord in any other way. Never make a knot in the cord or tie
it with other cables. The power cords should be routed so
that they are not likely to be stepped on. A damaged power
cord can cause a fire or give you an electric shock. Check
the power cord once in a while. If you find it damaged,
ask your nearest Pioneer authorized independent service
company for a replacement.
2
AM loop antenna
3