Control Panel - LG DLE1501 Serie Manual Del Propietário

30 OPERATION

Control Panel

4
POWER Button
1
Press the button to turn the dryer ON. Press again to
turn the dryer OFF.
NOTE
• Pressing the POWER button during a cycle will
cancel that cycle and any load settings will be lost.
START/PAUSE Button
2
Press this button to start the selected cycle. If the
dryer is running, use this button to pause the cycle
without losing the current settings.
NOTE
• If you do not press the START/PAUSE button to
resume a cycle within 60 minutes, the dryer turns off
automatically and all cycle settings are lost.
Time and Status Display
3
The display shows the settings, estimated time
remaining, options, and status messages for the
dryer.
3
5 6 7
Cycle Option Buttons
4
Press each of these buttons to select additional cycle
options. Press and hold any button marked with an
asterisk for 3 seconds to activate a special function.
More Time/Less Time Buttons
5
Use these buttons with the Time Dry and other
Manual Dry cycles to adjust the drying time. Press
the More Time button to increase the selected
manual cycle time by 1 minute; press the Less Time
button to decrease the cycle time by 1 minute.
Cycle Modifier Buttons
6
Use these buttons to select the desired cycle settings
for the selected cycle. The current settings are shown
in the display. Press the button for that option to view
and select other settings.
Cycle Buttons
7
Press the Cycle button repeatedly to scroll through
the cycle selections until the desired cycle is
selected. The standard presets for the selected
cycle will be shown in the display. On MANUAL DRY
cycles, these settings can be adjusted using the cycle
modifier buttons any time before starting the cycle.
2 1