Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper
interpretation of these symbols will allow you to operate the product better and safer.
SYMBOL
Safety Alert Symbol
V
Volts
hrs
Hours
Direct Current
n o
No Load Speed
.../min
Per Minute
Wet Conditions Alert
Read the Operator's Manual
Eye Protection
Keep Bystanders Away
Gloves
Operate With Two Hands
Moving Parts
Electric Shock
Kickback
Sharp Blade
Recycle Symbols
Li - Ion
SYMBOLS
NAME
5 — English
EXPLANATION
Indicates a potential personal injury hazard.
Voltage
Time
Type or a characteristic of current
Rotational speed, at no load
Revolutions, strokes, surface speed, orbits etc., per minute
Do not expose to rain or use in damp locations.
To reduce the risk of injury, user must read and understand
operator's manual before using this product.
Always wear safety goggles or safety glasses with side
shields and, as necessary, a full face shield when operating
this product.
Keep all bystanders at least 50 ft. away.
Wear non-slip, heavy-duty protective gloves when handling
the blades.
Hold and operate the hedge trimmer properly with both
hands.
Keep hands away from moving parts.
Failure to use in dry conditions and to observe safe practices
can result in electric shock.
DANGER! Beware of kickback.
Sharp cutting blades. To prevent serious injury, do not touch
cutting blades.
This product uses nickel- cadmium (Ni-Cd) and lithium-ion
(Li-ion) batteries. Local, state, or federal laws may prohibit
disposal of batteries in ordinary trash. Consult your local waste
authority for information regarding available recycling and/or
disposal options.