General Specifications - Klein Tools MM1300 Manual De Instrucciones

ENGLISH
The Klein Tools MM1300 is an auto-ranging multimeter. It measures AC/DC
voltage, AC/DC current, resistance, capacitance, frequency, duty cycle, and
temperature. It can also test diodes and continuity.
• Operating Altitude: 6572 ft / 2000m
• Relative Humidity: <75%
• Operating Temperature: O°C/32°F to 50°C/122°F
• Storage temperature: -20°C/ -4°F to 60°C/140°F<80% R.H.
• Accuracy Temperature: 18°C/64°F to 28°C/82°F
• Temperature Coeffi cient: 0.1*(specifi ed accuracy)/ °C
• Sampling Frequency: 3 samples per second
• Dimensions: 7" x 3.5" x 1.875"
• Weight: 14 oz.
• Calibration: Accurate for one year
• CAT Rating: CAT III 1000V, CAT IV 600V
• Accuracy: ± (% of reading + # of least signifi cant digits)
To ensure safe operation and service of the tester, follow these instructions.
Failure to observe theses warnings can result in severe injury or death.
• Before each use, verify meter operation by measuring a known
voltage or current.
• Never use the meter on a circuit with voltages that exceed the
category based rating of this meter.
• Do not use the meter during electrical storms, or in wet weather.
• Do not use the meter or test leads if they appear to be damaged.
• Ensure meter leads are fully seated, and keep fi ngers away from the
metal probe contacts when making measurements.
• Do not open the meter to replace batteries or fuses while the probes
are connected.
• Use caution when working with voltages above 60V DC, or 25V AC
RMS. Such voltages pose a shock hazard.
• To avoid false readings that can lead to electrical shock, replace
batteries if a low battery indicator appears.
• Unless measuring voltage or current, shut off and lock out power
before measuring resistance or capacitance.
• Always adhere to local and national safety codes. Use individual
protective equipment to prevent shock and arc blast injury where
hazardous live conductors are exposed.
~
AC Alternating Current
DC Direct Current
DC/AC Voltage or Current
Ground
MM1300
Instruction Manual

GENERAL SPECIFICATIONS

WARNINGS
SYMBOLS
Warning or Caution
Dangerous levels
Double Insulated Class II
AC Source