Configuring Date/Time Settings; Configuring Source Settings; Configuring Other Settings - Nevir NVR-7502-40HD-N Manual De Instrucciones

• Press OK button while the Format Disk option
is highlighted. A menu will appear on the screen,
requiring you to enter a pin number. If you have not
changed the pin number, the factory default is 0000.
After you enter the pin, a pop-up menu appears on
the screen to ensure that the hard disk should be
formatted, select "YES" and press OK to format the
hard disk. Select "NO" and press OK to cancel. Ensure
you back up important recordings before you format
the USB disk unit.
Hard Disk Info
To view the details about the USB disk, highlight Hard
Disk Info by using " " or " " key and press OK. USB
disk information will be displayed:

Configuring Date/Time Settings

Select Date/Time in the Settings menu to configure
Date/Time settings. Press OK button.
• Use " " or " " buttons to highlight Date/Time.
Date, Time, Time Settings Mode and Time Zone
Setting will be available.
Use " " or " " buttons to highlight the Time Settings
Mode. Time Settings Mode is set using " " or " "
buttons. It can be set to AUTO or MANUAL.
When AUTO is selected, Date/Time and Time Zone
options will not be available to be set. If MANUAL
option is selected as the Time Zone can be altered:
• By pressing " " or " " buttons select Time Zone.
Use " " or " " buttons to change the Time Zone
between GMT-12 or GMT+12. Date/Time on the top
of the menu list will then change according to the
selected Time Zone.
• Changes are automatically stored. Press
to exit.

Configuring Source Settings

You can enables or disable selected source options.
The TV will not switch to the disabled source options
when "SOURCE" button is pressed.
• Select Sources in the Settings menu and press
OK button.
• Press"
• Use " " or " " button to enable or disable the selected
source. Changes are automatically stored.

Configuring Other Settings

To view general configuration preferences, select
Other Settings in the Settings menu and press OK
button.
"MENU"
Operation
• Press "
• Use " " or " " button to set an option.
English - 111 -
" or " " buttons to select a source.
" or " " buttons to select an item.