Metra 95-9700 Instrucciones De Instalación página 3

5. Remove (11) screws securing the radio
bracket: (Figure E)
a. (2) T-27 Torx screws shared with the
gauge cluster and a third T-27 Torx
screw to remove the gauge cluster in
step 7.
b. (4) 5/32" Allen screws facing outward.
c. (4) T-25 Torx screws secured to the
radio.
d. (1) T-25 Torx screw shared with the
storage pocket.
6. Remove the radio bracket. (Figure E)
Note: This bracket will be reused with
the 95-9700 kit.
7. Remove the gauge cluster. (Figure E)
8. Remove (4) 3/16 Allen screws from the
sides of radio. (Figure F)
Note: These screws will be reused with
the 95-9700 kit.
9. Slide the radio out toward the rear of the
bike, and unplug the radio. (Figure F)
FAIRING DISASSEMBLY
(Figure E)
(CONT)
(Figure F)
3
REV. 9/10/2020 INST95-9700