Metra 95-9700 Instrucciones De Instalación página 5

1. Secure the radio brackets to the radio
housing with (4) #8 x 3/8" Phillips
screws supplied. (Figure A)
2. Slide the radio into the radio housing
assembly and secure with screws
supplied with the radio. (Figure B)
3.
Secure the radio housing assembly to the
bike using (4) 3/16 Allen screws previously
removed in step 8 of disassembly. (Figure C)
4. a. For the Street Glide, Electra Glide,
Ultra, and Limited models 2014-Up:
Attach the radio bracket removed in
step 6 of disassembly to the top of the
radio housing assembly, and secure
with (4) #10-32 x 1/2" Phillips steel
machine screws supplied.
b. For the Road Glide 2015-Up:
Attach the fairing bracket removed in
step 10 of disassembly to the top of the
radio housing assembly, and secure
with (4) #10-32 x 1/2" Phillips steel
machine screws supplied. Ensure the
bracket is far forward, and the curved
portion is facing the rear of the bike as
mentioned in disassembly.
Continue to Axxess Interface Installation
KIT ASSEMBLY
(Figure A)
(Figure B)
(Figure C)
REV. 9/10/2020 INST95-9700
5