WARNING
Control board and inlet valve are intentionally not grounded and may present a risk of
electric shock only during servicing.
Service personnel - Do not contact this part while appliance is energized.
Cleaning
Control Panel
Clean with a soft, damp cloth. Do not use
abrasive substances.
Do not spray cleaners directly on the panel.
The control panel finish may be damaged by
some laundry pre-treatment soil and stain
remover products.
Apply such products away from your
dryer and wipe up any spills or overspray
immediately.
Tumbler
Remove any stains from the tumbler caused
by crayon, ink, fabric dye (from new items
such as towels or jeans) and so on with an
all-purpose cleaner.
Tumble old towels or rags to remove any
remaining stain or cleaning substance.
Once these steps are followed, stains may
still be visible, but should not transfer to
subsequent loads.
Stainless steel tumbler
To clean the stainless steel tumbler, use
a damp cloth with a mild, non-abrasive
cleaner suitable for easily marred surfaces.
Remove cleaner residue and dry with a
clean cloth.
DV8000J-03170M-01_EN-US_150122.indd 47
Dryer Exterior
Clean with a soft, damp cloth. Do not use
abrasive substances.
Protect the surface from sharp objects.
Do not place any heavy or sharp objects
or a detergent box on the dryer. They can
scratch or damage the top cover of the
dryer. Keep these items in a separately
purchased pedestal or in a separate storage
box.
The entire dryer has a high-gloss finish.
Avoid scratching or damaging the surface
when using the dryer.
Dryer Exhaust System
Inspect and clean the dryer exhaust system
yearly to maintain optimum performance.
The outside exhaust hood should be cleaned
more frequently to ensure proper operation.
English 47
2015/1/23 16:30:05