Oster GCSTBS4801L Manual De Instrucciones página 16

StEaM IronInG
Steam ironing is only possible at high temperatures (" ", " "), as indicated on
the temperature control dial.
Be sure there is enough water in the reservoir.
Follow the instructions from the section "Using Steam Your Iron" for your iron model.
Set the steam select switch to the desired steam level position (figure 3). You are
now ready to start steam ironing. The steam will be released evenly through vents
located in the soleplate for easier ironing.
Figura 3
SPraY MISt
The spray mist feature is a powerful water spray mist that dampens the fabric to help
remove wrinkles from heavy fabrics and to set creases.
Press the spray mist button firmly to start the spray.
tIME oUt ShUt-oFF
(Model GCSTBS4801W only)
When the iron is plugged in and turned on, the power indicator will light steadily,
indicating there is power in the iron. Once the selected temperature is reached, the light
will go off and you can begin to Iron.
A 30-minute timer will start once the unit has been plugged in.
To reset the Iron:
Unplug the iron and then put it back into the wall outlet. This will restar the timer for the
auto shut-off feature.
English - 6