Bematech I-150 Guía De Referencia Rápida página 16

5. Configuration Warning
Scanning any barcode in this manual can affect the setup and
programming of your scanner. Each barcode specified below
serves a specific role in the needs of the final customer. All
settings are saved in a non-volatile memory and are kept even
after turning the scanner off.
6. How to configure the scanner
Once the scanner is connected, and a configuration is needed,
follow the steps described ahead for a successful
configuration:
Turn on the Scanner
Scan
"Start Configuration"
barcode
Scan the necessary
configuration barcode
Scan
Turn off the
"End Configuration"
Scanner
barcode
Configuration was
Configuration was
not successfully
successfully saved
saved
REMARK:
To "Set All Default" and to "Read Version", it's not
necessary to follow the steps above, only to scan the barcodes
indicated ahead.
16