Rds - Rds (Radio Data System) - Phonocar VM 022 Manual De Instrucciones

RDS (Radio Data System)
RDS service availability varies with areas . Please understand if RDS service is not available in you area,
the following service is not available .
RDS basics
AF( Alternative Frequency): When the radio signal strength is poor, enabling the AF function will allow the
unit to automatically search another station with the same PI (program identification) as the current station but
with stronger signal strength.
PS ( Program Service name ) The name of station will be display instead of frequency.
AF Mode: Press TA/AF function to switch AF mode on and off.
AF on: AF function is activated.
AF off: AF function is disabled.
Remark: AF indicator on LCD will flash until RDS information is
received.
If RDS service is not available in your area, turn off the AF mode.
REG Mode: Press PTY for more than 2 seconds to switch REG
mode on and off.
REG ON: AF function will implement the regional code (of the PI)
and only stations in the current region can be tuned automati-
cally.
REG OFF: AF function will ignore the regional code (of the PI)
and stations in the other regions can also be tuned automatically.
CT (Clock Time) Service
When receiving a RDS station, the CT ( Clock Time ) service
automatically adjusts the time.
NO CT will display in areas where CT service is not available.
32