Disconnection From The Electricity / Power Cut - Haverland CERATECPRO Serie Manual De Instalacion Y Uso

3. OPERATION
ACTION
4
Press the
setting.
5
Press to confirm the setting. The device will
automatically exit the advanced settings menu.
6
Press the button to exit.

3.12 DISCONNECTION FROM THE ELECTRICITY / POWER CUT

buttons to modify the chosen
If the radiator remains disconnected from the electricity (for
example, the radiator switch is disconnected) or if a power
cut occurs that lasts longer than 30 minutes, "Pr:Hd" will
appear on screen and the screen will flash red.
You must set the time and day by following point 3.5.2
SETTING THE CLOCK.
All other programmed parameters will remain in the memory
If the radiator is connected to a Haverland
Smartbox (not supplied), this "Pr:Hd" message will
not appear, as the time and day will be recovered
via the Internet.
EN
SCREEN
CERATECPRO
EN
41