Tabla de contenido
Publicidad
+
Card
Carte
Tarjeta
Cleaning Agitator
➢ Clean agitator after every five uses
➢ Remove lower plate.
➢ Cut off any carpet pile and lint
➢ Remove agitator.
➢ Remove any string or debris located
➢ Reinstall agitator and lower plate.
Replacing Agitator
➢ When the bristles on the agitator are
➢ Remove lower plate and agitator.
➢ Clean debris from end caps.
➢ Position belt over belt pulley on the
➢ Reinstall agitator and lower plate.
- 44 -
and every time the belt is replaced.
entangled around agitator with a
pair of scissors.
on the end caps, washers or agitator
shaft.
worn so that they do not touch a
card held across the lower plate, the
agitator should be replaced.
new agitator.
Publicidad
Tabla de contenido
