Pleasant Hearth GLF-5002-50 Instrucciones Importantes página 9

ASSEMBLY INSTRUCTIONS
2. Attach a mounting bracket (AA) to the wall
in the location you have selected to put the
mantel (A) by positioning the mounting bracket
(AA) at approximately the same height as the
mounting bracket (AA) previously attached to
the mantel (A).. Insert screws (BB) through the
mounting bracket (AA) and into a wall stud. If
there is no stud present, insert wall anchors
(DD) before inserting the screws (BB). Tighten
with a screwdriver.
3. Set the mantel (A) 2-3 inches from the wall
with both mounting brackets (AA) aligned. Slip
the nylon strap (CC) through the openings in
each of the mounting brackets (AA) and secure
the nylon strap (CC). This will help prevent the
mantel from tipping.
DANGER: This product is only a deterrent. It
is not a substitute for proper adult supervision.
2
DD
BB
3
9
AA
BB
CC
AA
EE
AA