Unidad De Estado Sólido; Removing The Primary M.2 Solid-State Drive - Dell Precision 7550 Manual De Servicio

Steps
1. Connect the battery cable to the connector in the battery.
2. Place the battery onto its slot in the computer.
3. Replace the three (M2x5) screws to secure the battery to the computer.
Next steps
1. Install the base cover.
2. Install the SD card.
3. Follow the procedure in
Unidad de estado sólido

Removing the primary M.2 Solid-state drive

Prerequisites
NOTE: For computers shipped with M.2 2280 or 2230 SSD installed in slot 3 and/or slot 5.
1. Follow the procedure in
2. Remove the SD card.
3. Remove the base cover.
About this task
The figure indicates the location of the primary M.2 SSD and provides a visual representation of the removal procedure.
28 Desmontaje y reensamblaje
after working inside your computer.
before working inside your computer.