Placa Base; Removing The System Board - Dell Precision 7550 Manual De Servicio

Placa base

Removing the system board

Prerequisites
1. Follow the procedure in
2. Remove the SD card.
3. Remove the SSD door.
4. Remove the secondary M.2
5. Remove the base cover.
6. Remove the battery.
7. Remove the primary M.2
8. Remove the SIM card.
9. Remove the secondary
10. Remove the WWAN card.
11. Remove the WLAN card.
12. Remove the keyboard lattice.
13. Remove the keyboard.
14. Remove the primary memory.
15. Remove the heat-sink assembly.
16. Remove the inner frame.
About this task
The figure indicates the location of the system board and provides a visual representation of the removal procedure. Images to be
uploaded in the next review cycle.
NOTE: For discrete models shipped with GPU card:
62 Desmontaje y reensamblaje
before working inside your
SSD.
SSD.
memory.
computer.