Compartimento Para Tarjetas Inteligentes; Removing The Smart-Card Reader - Dell Precision 7550 Manual De Servicio

Steps
1. Align and place the inner frame in the computer chassis.
2. Replace the eight (M2x5) and the ten (M2x2.5) screws to secure the inner frame in place.
3. Route the WLAN and WWAN antenna cables through the routing guide.
Next steps
1. Install the WLAN card.
2. Install the WWAN card.
3. Install the primary M.2 SSD.
4. Install the battery.
5. Install the base cover.
6. Install the SD card.
7. Follow the procedure in

Compartimento para tarjetas inteligentes

Removing the smart-card reader

Prerequisites
1. Follow the procedure in
2. Remove the SD card.
3. Remove the base cover.
4. Remove the battery.
5. Remove the primary M.2
6. Remove the inner frame.
after working inside your computer.
before working inside your
SSD.
computer.
Desmontaje y reensamblaje 51