Powermate P-FTT-160MD-E Manual De Operación página 10

Assembly
(Continued)
• Save all instructions
INSTALL THE TINES
(See Figure 5a and 5b)
1. Slide the tines onto the tine axle. Install the internal tines
first. Sharp edge of the tines should face down to till the
ground. Tighten the M10x50 bolt with lock nut provided to
secure the inside tines.
2. For wide 21" tilling, install the outside tines in the way that
the long half of the tine pipe faces towards the inside tines.
For narrow 16" tilling, install the outside tines in a way that
the short tine pipe faces towards inside the tines.
3. Tighten the M8x50 bolt with the locknut provided to secure
the outside tines.
Questions? Call Toll Free at 1-800-737-2112
If you need assistance or find any parts missing, CALL
TOLL FREE: 1-800-737-2112.
Sharp edge of tine should face down to the ground.
Sharp edge of tine should face down to the ground.
9
Copyright © 2010 MAT Engine Technologies, LLC
Figure 5a
Figure 5b