Using The Device - WMF LINEO Instrucciones De Uso

Ocultar thumbs Ver también para LINEO:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 28
The program ends automatically, both the Ice crush and Interval buttons now
illuminate again.
You can end the program at any time by pressing the Interval button.
Then thoroughly rinse the whole glass jar (3) with clean water.
Glass jar
The cap (1) in the lid (2) can be removed by turning it clockwise. It can then be
used as a measure (20/40/60 ml).
The glass jar (3) can be dismantled, especially for cleaning. To do so, place the
jar on the table with the opening facing down and rotate the blade assembly (5)
clockwise (see diagram).

Using the device

Clean the glass jar (3), lid (2) and cap (1) before using for the first time. Make sure
that you do not injure yourself on the sharp blade. Place the glass jar (3) on the
drive unit (6).
Add the ingredients, close the glass jar (3) with the lid (2) and cap (1) and set the
selector switch to the desired operating mode.
Speed
Use
low
Instant drinks, soft fruits and cocktails
(min)
with alcohol
low
Milkshakes
(min)
medium
Soups, milkshakes with harder fruits,
sauces, baby food, vegetables
high
Nuts, hard cheese, dry bread
(max)
Additional ingredients may be added while the motor is running. To do this,
simply remove the cap (1).
You can now remove the blade assembly
(5) and the sealing ring (4).
To assemble, begin by attaching the
sealing ring (4) to the blade assembly (5).
When doing so, make sure the sealing ring
(4) is fitted properly on the blade assembly
(5). Then, place the blade assembly (5) into
the glass jar (3) and turn anticlockwise
until tightly fitted.
Maximum time
40-60 s
1 – 2 min
1.5 – 2 min
40-60 s
13

Publicidad

Tabla de contenido
loading

Tabla de contenido